Thermodynamic Assessment of Molten Bix-Sn1-x (x = 0.1 to 0.9) Alloys and Microstructural Characterization of Some Bi-Sn Solder Alloys.

Properties such as lower melting temperature, good tensile strength, good reliability, and well creep resistance, together with low production cost, make the system Bi-Sn an ideal candidate for fine soldering in applications such as reballing or reflow. The first objective of the work was to determine the thermodynamic quantities of Bi and Sn using the electromotive force measurement method in an electrolytic cell (Gibbs' enthalpies of the mixture, integral molar entropies, and the integral molar excess entropies were determined) at temperatures of 600 K and 903 K. The second objective addressed is the comprehensive characterization of three alloy compositions that were selected and elaborated, namely Bi25Sn75, Bi50Sn50, and Bi75Sn25, and morphological and structural investigations were carried out on them. Optical microscopy and SEM-EDS characterization revealed significant changes in the structure of the elaborated alloys, with all phases being uniformly distributed in the Bi50Sn50 and Bi75Sn25 alloys. These observations were confirmed by XRD and EDP-XRFS analyses. Diffractometric analysis reveals the prevalence of metallic Bi and traces of Sn, the formation of the Sn0.3Bi0.7, Sn0.95Bi0.05 compounds, and SnO and SnO2 phases.

Tentative indicators of malaria in archaeological skeletal samples, a pilot study testing different methods.

OBJECTIVE: This study attempts to integrate multiple methods to investigate the presence of malaria in human skeletal samples from an archaeological context. MATERIALS: 33 well preserved human remains originating from a 17th-century archaeological site in southeastern Romania. METHODS: The human bone samples were analyzed using rapid diagnostic tests for malaria antigens and PCR amplification of Plasmodium falciparum apical membrane antigen 1. A preliminary test was performed to identify and briefly characterize the presence of hemozoin using a combination of TEM imaging and diffraction. RESULTS: The rapid diagnostic tests indicated that more than half of the examined samples were positive for Plasmodium antigens, but no traces of the parasites' genetic material were detected despite repeated attempts. The TEM images indicated that hemozoin might be a promising diagnostic marker of malaria in ancient bones. CONCLUSIONS: The indisputable identification of malaria in the analyzed archaeological population was not possible as none of the applied methodological strategies turned out to be straightforward. SIGNIFICANCE: This study reinforces the intricacy and limitations of unequivocally identifying malaria in past populations and sets the stage for future studies on such life-threatening infectious disease in a geographical space, which is currently underrepresented in the bioarchaeological literature. LIMITATIONS: The low sample size and the lack of consistency across all assays hindered understanding the role of malaria in the studied population. SUGGESTIONS FOR FURTHER RESEARCH: Further thorough multidisciplinary approaches on malaria detection in ancient settlements would be appropriate to inform our knowledge of its origins, frequency, and pathogen changes over centuries.

An improved balanced replicated sampling design for preliminary screening of the tailings ponds aiming at zero-waste valorization. A Romanian case study.

The scope of this study consists of setting up of an integrated cost-effective sampling & laboratory analyses procedure which delineates sampling, sub-sampling and analytical uncertainties in case of fine-grained extractive waste deposits. This procedure is designed to support the decision makers towards fine-grained waste deposits upcycling and land reclamation. This procedure consists of a balanced replicated sampling design (BRSD) coupled with a three split levels ANOVA data processing. The paper provides the readership with the mathematical backgrounds of the three split level ANOVA analysis (3L-ANOVA) and an Excel algorithm for its implementation. Also, the paper presents an example of implementation of the developed methods in the case of a Romanian iron ore tailings (IOT) old pond. The findings of the paper consist of: a) argues, based on OM, SEM-EDS, XRFS and XRD observations, that classical TOS is ineffective for fine-grained waste deposits; b) BRSD in conjunction with 3L-ANOVA analysis is the only approach fit for reliable characterization of the fine-grained stockpiles; c) sampling uncertainty is the critical factor of the uncertainty budget of the analyte concentration; d) Lilliefors approach is adequate for the hypothesis testing where or not the measurand is normal distributed; e) The outcomes of the BRDSD&3L-ANOVA investigations carried on Teliuc tailings, estimated at circa 5.5* 106 m3, consist mainly of mineral quantification at lot level i.e. quartz ∼54% (±7%), hematite ∼15% (±3%), calcite ∼11% (±3%), MgO 3% (±1%), Al2O3 9% (±2%). The concentrations of some CRMs like Ti, V, Ba, Y, W were found at ACE limits and their associated relative expanded uncertainties overpass 50%. Thus, the expanded uncertainties clearly depict the reliability of acquired data for the decision makers regarding waste valorization. f) The IOT into Teliuc can be upcycled as minerals for cement and ceramic industries as well as for geopolymer manufacture. Also, IOT can be downcycles as filler in road construction and mine closure. Finally, the Teliuc yard can be rehabilitated with zero-waste left behind. The data exactness provided by this procedure can be increased to any desirable level through increasing the number of collected items, but the cost of sampling and analyses increases proportionally. In such circumstances, the posted approach can be tailored at the stakeholder request as to safely underpin the decision to turn finegrained by-products into valuable secondary resources, facilitating a greater circularity of the mining industry.

Investigation of the Microstructure, Hardness and Corrosion Resistance of a New 58Ag24Pd11Cu2Au2Zn1.5In1.5Sn Dental Alloy.

Higher-noble dental alloys (Au, Ag, and Pd) are the most desirable for dentistry applications, but they are expensive. Low-noble (Ag, Pd, Cu) dental alloys are alternatives to higher-noble ones due to their lower price. In this regard, the paper supports the price lowering of dental alloy by increasing the Cu content, i.e., a new 58Ag24Pd11Cu2Au2Zn1.5In1.5Sn dental alloy. The increasing addition of the Cu leads to a complex structure consisting of a solid solution that engulfs compounds of micrometric and nanometric sizes. The 58Ag24Pd11Cu2Au2Zn1.5In1.5Sn has demonstrated a much better electrochemical corrosion behavior in artificial saliva compared to the Paliag and Unique White dental alloys. The improved corrosion behavior of the new alloy is supported by the diminishing of the Cu selective diffusion into the electrolyte due to its retaining into compounds and into Ag-Pd solid solution. Also, the synergic effects of Cu, Zn, In, Sn may improve the corrosion resistance, but they have strengthened the 58Ag24Pd11Cu2Au2Zn1.5In1.5Sn matrix. The main finding addressed in the paper consists in a new 58Ag24Pd11Cu2Au2Zn1.5In1.5Sn dental alloy with improved corrosion resistance in artificial saliva.